Thin, crack-bridging sealing sheet made from tear-resistant polyethylene film. Thanks to the dual-sided special fleece lamination, the polyethylene film offers the optimum anchoring for tilelaying materials. Perfect for fast sealing measures on building sites with fixed deadlines in combination with ceramic tiles and slabs as well as natural stone floor coverings for indoor wall and floor surfaces

• 100% waterproof
• Water vapour retardant
• Flexible & crack-bridging
• High tear-resistance
• Alkaline and aging resistant
• Non-decomposing
• Quick and easy to install
• Low overall height
• Can be used on hot-water underfloor heating
• Strong adhesion of wedi laying materials
• Chemical-resistance in accordance with DIN EN 1847
• Suitable for application on hot-water floor heating systems
• Suitable for application under electric floor heating systems

• Areas of use wedi Subliner Dry

  wedi Subliner Dry is a sheet sealant for wet rooms subject to moderate exposure to water corresponding to the moisture exposure classes A0 in accordance with the ZDB information sheet, such as, for example:
  • Bathrooms in private homes
  • Hotel bathrooms
  
  Tested and approved by the building authorities for the manufacture of a composite sealing material for wet rooms subject to heavy exposure to water of the moisture exposure classes A, C such as, for example:
  • Showers
  • Borders of swimming pools
  • Commercial kitchens and laundries
  
  In the case of areas that require an official building authority permit, only system-tested components may be used. More information on this is contained in the general test certificate issued by the building authorities.