A special variant of the wedi Building Panel, wedi Vapor 85 is designed for the specific installation in steam showers and steam rooms. It will serve as a strong vapor retarder, by far exceeding the minimum requirements set by the Tile Council of North America (TCNA) for vapor retarders used in continuous use steam rooms. At the same time it offers all the benefits of the traditional and time tested wedi Building Panel: it’s light yet strong. It can be cut and worked with in a clean and exact way. It adds insulation, and provides great bond for tile and other suitable surface finishes.
However, the best feature is that it is a component of a fully functioning system which was developed to also vaporproof seams, and fastener penetrations. The wedi Vapor 85 makes best use of wedi system technology taken from wedi Building Panel, wedi Subliner Dry, wedi Subliner Dry Sealing Tape, and wedi Joint Sealant. Additionally, it works great with wedi Fundo or Subliner Dry on steam room floors.
wedi Vapor 85 is both a panel type sealing system and a building board with constructional and vapour resistant properties which is specifically tested and approved for wall applications. It can be used on solid walls and stud frames, as well as on floors, in interior areas. Due to its special properties, it is versatile in its applications:
• Carrier element for laying tile, slab and natural stone floor coverings using the thin-bed method, and surface for plaster and other materials
• Vapour barrier
• Effective thermal insulation
• Compound seal with tile and slab coverings on wall surfaces
Information about fitting, implementation of the sealing details and surface requirements can be found in the “wedi Vapor 85 building board application guidelines”.
Warmup Underfloor Heating
Levolution Tile Spacing System
Miracle Sealants